H38x/EN GL/D11 Global Documentation
Page 18/53
DS Agile H38x
Address Name
2 nodeType
3 nodeName
4 versionName
5 macAddressA
6 macAddressB
7 linkStatusA
8 linkStatusB
3.3.5 SNMP Client Software
Readily available Management Information Bases (MIB) browser software enables you to
perform all the basic Simple Network Management Protocol (SNMP) operations, such as
GET, GETNEXT, and RESPONSE, by connecting to the switch.
3.3.6 SNMP traps
A Simple Network Management Protocol (SNMP) trap is a change-of-state message. This
product generates SNMP traps on coldstart, warmstart, linkup, linkdown or authentication
failure. The version used is SNMP v1 and the traps are shown in the table below:
Trap Type Name Description
0 coldstart The switch is booting
1 warmstart The switch is rebooting
2 linkdown An interface has gone down
3 linkup An interface has come up
4 authentication failure An invalid password was
received in a message
3.3.7 SNMP Accessibility
The Simple Network Management Protocol (SNMP) supports the versions 1 – 3 according to
the rules below:
SNMP v1 and v2:
− Read community: Public
− Write community: Private
SNMP v3:
Level System MIB Other MIB
Observer Read, plain -
Operator Read, encrypted Read, encrypted
Administrator Read/Write, encrypted Read/Write, encrypted
An Administrator can change any user password. Other users can only change their own
password.
To Next Page
Loading...
General