Need help?Do you have a question about the Alstom DS Agile H38 Series and is the answer not in the manual?
General| Category | Switch |
|---|---|
| Manufacturer | Alstom |
| Voltage Rating | Up to 38 kV |
| Operating Mechanism | Spring mechanism |
| Enclosure | Metal enclosure |
| Standards Compliance | IEC 62271-100 |
Overview of the MICOM - DS Agile Ethernet switch product family.
Explains the naming convention for MiCOM - DS Agile Ethernet switches.
Details the specific features and capabilities of the DS Agile H38x switch.
Guidelines for safe operation, handling, and personnel qualifications.
Explanation of safety symbols and protective conductor terminals.
Procedures for safe installation, commissioning, and servicing of the equipment.
Safe procedures for removing and disposing of the equipment.
Safety-related technical data including fuse rating, class, and environment.
Precautions for handling electronic components to prevent damage.
Guidelines for safely packaging and unpacking the device.
Information regarding product guarantees, warranty, and Alstom's liability.
Details about copyright, trademarks, and warnings on product usage.
Explanation of the Parallel Redundancy Protocol for seamless communication.
Description of the Base-Tx Ethernet switch ports and auto-negotiation features.
How to manage the device using SNMP, including MIB structures.
Details on Precision Time Protocol (PTP) and Network Time Protocol (NTP).
Explanation of LEDs, alarm contacts, and TELNET port for user interaction.
Overview of the different DS Agile H38x models and their port configurations.
Compliance of the product with relevant European directives and standards.
Specifications for 10/100Base-Tx and 100Base-Fx Ethernet ports.
Mechanical, power supply, and relay specifications for the device.
Details on forwarding mode, memory bandwidth, and MAC address learning.
Environmental standards and immunity test levels for the device.
Instructions and diagrams for mounting the product on a DIN Rail.
Critical safety instructions for connecting the protective earth conductor.
Guidelines for selecting and fitting cables for optimal performance and safety.
Procedures for connecting the primary and redundant power supply inputs.
How to connect alarm contacts for power supply and optical port status.
Information on connecting Ethernet ports, including cable types and PRP ports.
Overview of maintenance requirements and recommended inspections.
Essential safety checks and document study before performing maintenance.
Procedures for replacing the DS Agile H38x if it fails.
Steps to establish a TELNET session and log in with root or user credentials.
Managing passwords and understanding the different access levels (root, user, SNMP).
Commands for setting IP addresses, NTP, passwords, and synchronization mode.
Commands for rebooting, getting statistics, port control, and relay management.
Step-by-step guide to upgrading the switch's firmware via FTP.
Commands to retrieve configuration summary, status, and other device information.
Using the 'h' command to display available configuration and management parameters.
Explanation and calculation of fibre optic link budgets for different cable types.
To Next Page