Alstom MiCOM P54 Series - Page 828

P54x/EN CM/La4 Commissioning
(CM) 10-80 MiCOM P543, P544, P545 & P546
CM
*Delete as appropriate
Applied current A
Expected operating time s
8.4.12.3 Measured operating time s
All disabled elements which were noted/circled
previously are restored?
Yes* No*
8.4.13 Restore Communicxations and clear VTS?
Yes*
N/A*
8.5 Trip and auto-reclose cycle checked
3 pole cycle tested?
Yes*
No*
N/A*
Pole A cycle tested?
Yes* No*
N/A*
Pole B cycle tested?
Yes* No*
N/A*
Pole C cycle tested?
Yes* No*
N/A*
9
END-TO-END PROTECTION
COMMUNICATION TESTS
9.1 Communication Alarm Check
Any Ch 1 communication alarm? Yes*
No*
Any Ch 2 communication alarm?
Yes* No*
N/A*
Restore Communications Channels
9.1.1.1 Direct fiber connection
Optical received signal level Ch 1
dBm
N/A*
Optical received signal level Ch 2
dBm
N/A*
9.1.1.2 Fiber connections to C37.94
Optical received signal level from C37.94 Ch 1
dBm
N/A*
Optical received signal level at C37.94 Ch 1
dBm
N/A*
Optical received signal level from C37.94 Ch 1
dBm
N/A*
Optical received signal level at C37.94 Ch 1
dBm
N/A*