iv
Altai Technologies Ltd. All rights reserved
Altai C2s Dual-Band 2x2 802.11ac WiFi AP/Bridge
Installation Guide
Warning
C2s may require professional installation depending on the deployment
scenario.
Only use the power adaptor supplied with C2s. Using a different power
adaptor might damage C2s.
Install a lightning arrestor to protect the AP for lightning dissipation
during rainstorms. Lightning arrestors are mounted outside the structure
and must be grounded by means of a ground wire to the nearest
ground rod or item that is grounded.
Disclaimer
All specifications are subject to change without prior notice. Altai
Technologies assumes no responsibilities for any inaccuracies in this
document or for any obligation to update information in this
document. This document is provided for information purposes only.
Altai Technologies reserves the right to change, modify, transfer, or
otherwise revise this publication without notice.
To Next Page
Loading...
