1
Altai C2s Dual-Band 2x2 802.11ac WiFi AP/Bridge
Installation Guide
Altai Technologies Ltd. All rights reserved
1. Introduction
This guide is designed to provide the information needed to mount
Altai C2s Super WiFi AP/Bridge at the site location.
The document is applicable for hardware platform C2s and the
following model.
Product Name: C2s Dual-Band 2x2 802.ac WiFi AP/Bridge
Model Number: C2-2221-000
It is assumed in this document that a site survey has been performed
before the site installation. The appropriate antenna pole and AP
locations have been selected. It is a good practice to have a
document which consists of a map and drawing illustrating the AP and
poles locations. A planning on IP network is also an important issue for
network planning.
The user may need to refer the following document during C2s
installation and Configuration.
[1] C2s Dual-band 2x2 802.11ac Wi-Fi AP/Bridge Configuration Guide
[2] C2s Dual-band 2x2 802.11ac Wi-Fi AP/Bridge Data Sheet
To Next Page
Loading...
