Complete daily preoperational checklist
Test breakaway switch system
Check general condition of tires and tire pressure
Lubricate clutch bearings (refer to clutch
operator’s manual)
VIN No. _________________________ Location ___________________________ Date __________________
Model Number ______________________________ Date of Manufacture _______________________________
Hours Meter ____________________________ Inspector ____________________________________________
Intervals
Weekly Monthly Yearly
Symbols
/O = Okay or completed C = Corrected by inspector R = Repair or replacement required
U = Unsafe to operate N/A = Not applicable
Preventive Maintenance and Inspection Checklist
Appendix — Preventive Maintenance and Inspection Checklist
Complete weekly checklist
Where applicable check battery water level
Check drive belt tension and alignment
Where applicable check pump belt and alignment
Complete monthly checklist
Change hydraulic oil lter
Lubricate trailer wheel bearings (refer to axle manual)
Replace fuel lter (refer to engine operating manual)
Inspect hitch for wear or damaged components
Lubricate all hydraulic valve connecting linkages
Lubricate slide box
Lubricate chute rotation
Lubricate hinges and friction points
Lubricate clutch lever and linkage (refer to clutch
operator’s manual)
Lubricate drive roller bearings
Lubricate all pivot points and pins
Lubricate jack
Flush and replace engine coolant (refer to engine
operator’s manual)
Flush and replace hydraulic uid
Comments __________________________________________________________________________________
___________________________________________________________________________________________
Weekly
Monthly
Yearly
To Next Page
Loading...