Altera Cyclone V GX Starter Kit - HSMC

Cyclone V GX Starter Kit
User Manual
21
www.terasic.com
June 5, 2014
Figure 2-11 Controlling VGA display
2
2
.
.
9
9
H
H
S
S
M
M
C
C
Select the HSMC tab to see the window shown in Figure 2-12. This function is designed to verify
the functionality of the signals located on the HSMC connector. Before running the HSMC
loopback verification test, follow the instruction noted under the Loopback Installation section and
click on Verify. Please remember to turn off the Cyclone V GX Starter board before the HSMC
loopback adapter is installed to prevent any damage to the board.
The HSMC loopback adapter is not provided in the kit package but can be purchased through the
website below:
(http://hsmc_loopback.terasic.com)