15
malletKAT Quick Start Guide
The 20 Things you Want to Know
without Reading the Manual
We get it. You don’t want to read the manual. You’ve already figured out that the malletKAT
is really powerful. I mean really, really powerful. Your guessing that harnessing this power
requires knowing about lots of features, functions, etc. The size of the manual is really
daunting. Yikes!
The really good news is that we figured out a way for you to not read the manual and still
get great success. Throughout the years, the same questions keep on coming to us through
phone calls and emails. Most folks don’t care about all of the features, they just want to
play. So below is the list of questions with details on solving the most important questions
about the malletKAT! The trick is to find the question you need answered and just go there.
We are assuming that you are using the new malletKAT 7KS, with the Kurzweil Sounds built
in. Smart move! Let’s also make sure that we are starting at the beginning. Turn on your
malletKAT 7KS, wait until it powers up, then make sure that you see “U” on the top line on
the left of the screen. These are the User Kits. If you see the letter “F” or “C”, on the top
line, then you need to jump to the section called “Difference Between Factory, User Kits
and Chains”. Ok, here we go.
What Is the...? Why Can’t I...? How do I...?
BASIC INTERFACE (How do I Edit the malletKAT)........ 17
SETUPs (vrs Programs and Sounds)........ 18
DIFFERENCE BETWEEN FACTORY, USER AND CHAINS........ 19
CHANGE SOUNDS........ 20
BANK AND PROGRAMS........ 21
To Next Page
Loading...
