28
malletKAT Quick Start Guide
While Held Down, tap on the Dampen pad (a natural 3rd from top). Let go of Footswitch.
If you want to shut Dampening off and use normal playing,
Step on the Edit Footswitch,
While Held Down, tap on the Normal pad ( g natural 3rd from top). Let go of Footswitch.
CHAINS
How do I make my own
If you are reading this section, it is probably because you have found some sounds that you
really like, and want to put them in order so that you can call them up quickly when play-
ing.
When making up a Chain, the first thing that you want to do is to write down the USER KIT
NUMBERS that you want to use. Put them down on paper AND write down the order of
sounds that you want on this list.
So image that you want User Kit numbers 1, 5, 10, and 15 in order.
A Chain is a collection of these User Kits. The malletKAT has 16 different Chains. Each
Chain can have up to 16 User Kits stored in order. These are called “steps” in the CHAIN
So Lets set up Chain #1
Step on and Hold Down the Edit Footswitch
Now tap on the GLOBAL AUXILLARY PAD (d natural 3rd from top)
Now tap the number 46 (thats G# and C#)
The screen first shows you the Chain number and the Step number on the first line
On the Second Line, you will see the User Kit number.
Notice that there is a blinking cursor on the screen. You can move this cursor by using the
Forward or Backwards pads. Make sure that you are in CHAIN #1. If not, use the Backward
key to make the CHAIN number value blink, then use the INC or DEC pads to get the num-
ber to say 01.
To Next Page
Loading...
