25
malletKAT Quick Start Guide
MEMORY PROTECT
SAVING KITS
The malletKAT automatically saves any setting that you change as long as you are using
USER Kits and the Memory Protection is set to OFF.
Factory Kits lose any changes that you make as soon as you leave the kit regardless of this
setting.
If Memory Protection is set to ON, then no changes can be made.
To Turn ON Memory Protect,
Step on the Edit Footswitch.
While Held Down, press the GLOBAL AUXILIARY pad (d natural, third from top)
Now tap on the FORWARD pad once.
Use the INC (D#) or DEC (C#) to turn on Memory Protect (screen says PROTECTED)
or turn off the Memory Protect (screen says NOT PROTECTED)
CHANGE THE OCTAVE
When playing the sounds on the malletKAT, you may want to shift the sound up or down an
octave. Changing the octave is real easy on the malletKAT.
Step on the Edit Footswitch.
While held down, tap on the OCTAVE pad (highest e natural)
Use the INC or DEC pads (highest C#-D#) to raise or lower the octave.
Let go of the footswitch.
CONTROLLER ONE--CONTROLLER TWO
The malletKAT is like having two controllers in one. Each one of these controllers can have
its own sound. These two sounds can be played separately (HANG MODE), or doubled (LAY-
ER MODE) or split across the keyboard (SPLIT MODE). Each of these controllers can also
To Next Page
Loading...
