22
malletKAT Quick Start Guide
you have to change the bank number.
Now you need to go to the back of the manual and look at the list of sounds for the mal-
letKAT 7KS. On the top line of each list is a bank number. A bank number consists of two
parts called MSB xx and LSB xx.
So supposed you like the name of a sound on Bank 2, program Six. First you need to
change the Bank Number.
Step on the Edit Footswitch and Hold it Down
Now Step on the Kit Auxiliary Pad (2nd E natural from top).
Tap on the Forward Key three times.
Now you see the MSB, LSB Screen.
On the Kurzweil engine, all of the MSB numbers are always 00. If you don’t see 00, then
use the INC DEC pads to make it 00.
Now move to the LSB setting by using the Forward pad. Change it to 2 (our example) by
using the INC or DEC pads.
Now let go of the Footswitch, and start again, but this time tap on the Program Pad again
(high C). Use the INC DEC or Input numeric pads (black keys) to type in 6.
When you let go of the Footswitch, you will see on the bottom line of the screen
B 00-02 P06 v80. The 00-02 represents the Bank Number and the P06 represents the Pro-
gram Number.
VOLUME
There are two different kinds of volume. There is MIDI volume. This is a value that you set
in the SETUP anywhere from 00 to 127 and there are the physical buttons on the malletKAT
that is like the volume knob on a receiver.
The physical knobs control the overall volume of the entire instrument. The MIDI volume
To Next Page
Loading...
