21
malletKAT Quick Start Guide
So the black number pads are
C#=1
D#=2
F#=3
G#=4
A#=5
next octave up
C#=6
D#=7
F#=8
G#=9
A#=0
BANKS and PROGRAM CHANGES
Changing a sound on the malletKAT in a particular SETUP KIT that you are playing in
is performed by:
Stepping on the Edit Footswitch,
While Held down, tap on the high C pad.
Change the sound by either using the INC or DEC (C#-D#) pads or by inputing the number
using the black keys.
This is how you change the Program Number within the Setup. Even though the sound may
change, the name of the kit does not. That is because in the SETUP, you create your own
name.
You may also notice that while you are changing the program sounds, the name of a sound
displays, but it does not match the sound. This is normal. Ignore these names. They are
there if you are using a General MIDI synth. It is possible to block these names by changing
the setting in the Global Screens.
If you tap on the program pad (c natural) twice and then use the INC or DEC pads, you will
hear what sound you are calling up as you are auditioning them.
There are 127 programs in a bank. If you want to hear another bank of 127 programs, then
To Next Page
Loading...
