OPERATION
Si mple C ontr ol Coo k & Ho l d ▪ O p era to r’s Manual ▪ M N- 46 7 09 ▪ R ev 2 ▪ 3/ 2 1
50
Continued from previous page
10. Touch the “START” icon.
T
The control will display “Pre” and the actual cavity temperature.
When the oven reaches the set preheat temperature, the control will
display “Preheated”, and the “START” icon will flash.
11. Load wood chip tray into the oven.
Load food into the oven.
Insert probe into food and plug probe into the receptacle.
Touch the “START” icon.
The oven begins to cook by probe.
The control will display the set temperature and the probe
temperature.
Holding process ▪ When the set probe temperature is reached, the oven will sound an alert, the
HOLD icon will illuminate, and the oven will begin to hold at the set probe
holding temperature.
▪ The control will display the set holding temperature and the amount of time the
oven has been in the holding process.
▪ Touch the “COOK”, “TIME”, “PROBE”, or “HOLD” icon, then hold the “PROBE” icon
to view the probe temperatures.
▪ Touch the “COOK”, “TIME”, “PROBE”, or “HOLD” icon, then touch the START icon
for three (3) seconds at any time to put the cooking or holding process into
standby.
Result The cook by probe process is complete.
COOK TIME PROBE HOLD
SMOKE START
TH-TS-008733
COOK TIME PROBE HOLD
SMOKE START
TH-TS-008733
To Next Page
Loading...
