10
5.0 ADJUSTING GLOBAL RETARD
5.1 Global retard is an adjustment affecting the timing of all cylinders equally. This
adjustment can be equated to the manual timing switch of the Altronic CPU-90
system. Adjustments made as described below will be in effect until another
adjustment is made.
5.2 To adjust global retard:
FROM PRESS
TIMING
THEN AT PRESS
THEN AT PRESS
THEN AT NOTE: RESULTANT
TIMING SHOWN ON
BOTTOM LINE.
PRESS TO PRESS TO PRESS TO
INCREASE DECREASE EXIT
RETARD RETARD
ESC
To Next Page
Loading...
