Need help?Do you have a question about the Altronic CPU-95 and is the answer not in the manual?
Displays when shutdown input is triggered, preventing ignition.
Displays diagnostic warnings, alerting operator to potential problems.
Displays diagnostic faults, stopping operation and alerting operator.
Affects timing of all cylinders equally; adjustment is temporary.
Details the steps to access and adjust global retard.
Allows increasing or decreasing the one-step retard value.
Offsets individual cylinder timing by up to 3 degrees.
Details the procedure to enter the individual timing adjustment menu.
Resets all cylinder offset values to zero in temporary and EEPROM memory.
Describes saving temporary offsets to EEPROM memory.
Permits enabling or disabling the Multi-Strike feature.
Adjusts the engine overspeed setpoint in 10 rpm increments.
Describes faults, system behavior, and display messages upon detection.
Resets warnings and faults after diagnostics have been read.
Describes warnings, system behavior, and display messages upon detection.
Details the process of backing up the ignition system's EEPROM.
Explains programming the EEPROM via USB or other connections.
To Next Page
General
