Altronic CPU-95 - Ignition Cloning; 14.2 Programming the CPU-95 EVS EEPROM

CPU-95EVS OI 7-13
All rights reserved © ALTRONIC, LLC 2013
41
14.2 Programming the CPU-95EVS EEPROM
It is possible to program the CPU-95EVS system through the enhanced display,
P/N 791909-1, via USB, from a computer without a RS485 card. Refer to
programming instructions CPU-95EVS PI 4-08. The user must first confirm
the program option.
PRESS TO PRESS TO
CONTINUE EXIT
PROGRAMMING
The display module now writes the eeprom contents of the CPU-95EVS
ignition.
Next, the display module will read back what was written for verification.
With verification complete, the ignition is reset.
ENTER
ESC
WARNING: THE CPU-95EVS MUST BE
PROGRAMMED PRIOR TO USE.
REFER TO PROGRAMMING
INSTRUCTIONS CPU-95EVS PI 4-08.