ALTUS AL40L 4950 4B - Settings; Satellite Channel Tuning

18 / 57 TR
Television / User Manual
Searching television channels
with satellite signal
1 In the »Tuning Setup« menu, select »Satel-
lite« from »Scan Type« using »
<
« or »
>
«.
MENU ENTER
Tuning Setup
Back Start
Tune Type DTV
Service Type All
Channel Type Free+Scramble
Scan Mode Default
Scan type Satellite
Satellite TURKSA...
2 Select the »Satellite« option using » V « or
»
Λ « and select the satellite you want to
search with »
<
« or »
>
«.
3 Select »Channel Type« using »
V « or » Λ «.
Press »
<
« or »
>
« to select whether you
want to search for only free digital television
channels (Free), only scrambled digital
television channels (Scramble) or the both
(Free+Scramble).
Note:
7
If some of the frequencies are not stored
completely due the changes in satellite
parameters made by the broadcaster, it is
recommended to set the »Network Settings«
option to »Network«.
4 Select »Service Type« using »
V « or » Λ «.
Press »
<
« or »
>
« to select whether you want
to search for only television channels (DTV),
only radio (Radio) or the both (All).
5 Press »OK« to start the search.
– The »Channel Tuning« menu will be
displayed and the search for TV channels
will start.
– Search may take several minutes depend-
ing on the number of television channels
received.
Note:
7
The search can be aborted with »EXIT«.
6 Press »EXIT« to end searching.
SETTINGS
------------------------------------------------------------------------------------------------------------------