ALTUS AL40L 4950 4B - Settings; Terrestrial and Cable Channel Tuning

Television / User Manual
19 / 57 TR
SETTINGS
------------------------------------------------------------------------------------------------------------------
Searching terrestrial digital tele-
vision channels
1 In the »Tuning Setup« menu, select »DVB-T«
from »Scan Type« using »
<
« or »
>
«.
MENU ENTER
Tuning Setup
Back Start
Tune Type DTV
Symbol Rate Auto
Frequency Auto
Network ID Auto
Scan type DVB-T
Scan Type Full
2 Select »Tune Type« using » V « or » Λ «.
Select the tune type with »
<
« or »
>
«.
– »DTV« only searches for digital television
channels.
– »ATV« only searches for analogue televi-
sion channels.
– »DTV + ATV« searches for both analogue
and digital television channels.
3 Press »OK« to start the search.
– The »Channel Tuning« menu will be
displayed and the search for TV channels
will start.
– Search may take several minutes depend-
ing on the number of television channels
received.
Note:
7
The search can be aborted with »EXIT«.
4 Press »EXIT« to end searching.
Searching cable digital televi-
sion channels
1 In the »Tuning Setup« menu, select »DVB-C«
from »Scan Type« using »
<
« or »
>
«.
MENU ENTER
Tuning Setup
Back Start
Tune Type DTV
Symbol Rate Auto
Frequency Auto
Network ID Auto
Scan type DVB-C
Scan Type Full
2 Select »Tune Type« using » V « or » Λ «.
Select the tune type with »
<
« or »
>
«.
– »DTV« only searches for digital television
channels.
– »ATV« only searches for analogue televi-
sion channels.
– »DTV & ATV« searches for both analogue
and digital television channels
3 Select »Scan Type« with »
V « or » Λ « and
select (»Full«, »Speed« or »Blind Scan«) with
»
<
« or »
>
«.
Note:
7
You can speed up the search. To do this,
frequency and network ID information are
required. You can obtain such information
from your cable provider or find them in
Internet forums.