42 / 57 TR
Television / User Manual
OPERATION WITH COMMON INTERFACE
---------------------
What is Common Interface?
7
Common Interface (CI) is an interface for DVB
receivers.
7
Scrambled channels can only be viewed with
a CA module suitable for the encoding system
and the corresponding smart card.
7
The television set is equipped with a Common
Interface slot into which CA modules from
various providers can be inserted.
7
You can insert the provider’s smart card into
the CA module in order to enable the scram-
ble channels you want to see.
Inserting the CA module
Note:
7
Switch off the appliance before inserting
the CA module in the »CI« slot.
1 Insert the smart card into the CA module.
2 Insert the CA module with the smart card
into the »CI« slot on the television.
Note:
7
When you insert a CA module into the CI
slot on the television for the first time, wait
a few moments until the television has regis-
tered the CA module.
Access control for CA module
and smart cards
1 Press »MENU« to open the menu.
2 Press »
<
« or »
>
« to select the »Channel«
menu and press »OK« to confirm.
– »CHANNEL« menu is now enabled.
3 Press »
V
« or »
Λ
« to select »CI Informa-
tion« and confirm with »OK«.
Notes:
7
This menu give operating instructions and –
after you enter your PIN code – access to
channels of the PAY-TV provider.
7
Other settings are described in the manuals
for your CA module and smart card.
7
CAM is not supported in some countries
and regions. Please consult your authorised
dealer.
4 Press »EXIT« to finish the settings.
To Next Page
Loading...