11
Electronic Clock Control Pads and Lights
CLOCK
TIMER
HOUR
MINUTE
CLEAN
START
CLEAN
CANCEL
HOUR
• Use when setting hours for timer and clock.
MINUTE
• Use when setting minutes for timer and clock.
CLOCK
• Use to set time of day.
TIMER
• Use to set timer.
CLEAN START
• Use to begin self-cleaning.
CLEAN CANCEL
• Use to stop self-cleaning.
Self-clean indicator light
• Located between
CLEAN START
pad and
CLEAN CANCEL
pad. Glows when oven is
self-cleaning.
Oven indicator light
• Glows when oven cavity is warming. Located below
clock.
Setting Electronic Clock
1. Press
CLOCK
pad.
2. Press
MINUTE
pad until correct minutes display.
3. Press
HOUR
pad until correct time displays.
• Clock saves time of day after time is entered.
Setting Electronic Timer
Electronic timer does not control bake, broil, or self-clean
function.
1. Press
TIMER
pad.
• 59 minutes displays.
• Set timer up to 1 hour 59 minutes.
2. Press
MINUTE
or
HOUR
pad to set time.
• If desired time is less than 1 hour, press
MINUTE
pad until desired time displays.
• If desired time is more than 1 hour, press
HOUR
pad and then press
MINUTE
pad until desired time
displays.
• Timer begins counting down automatically after
time is entered.
3. After time elapses, press
CLOCK
pad to cancel
signal and return to time of day.
Oven Light
• Used to light inside of oven.
• On some models, light turns on when oven door is
opened.
• On all models, switch located next to clock, turns
oven light on and off without opening door.