Amano OPUS-7000 Series - QR Barcode (with Flexscan Option)

To Next Page

To Previous Page

OPUS-7000 Series

Operations

Manual

5. You may still request a receipt for the transaction by pressing the Receipt

button on the screen.

6. Retrieve the receipt from the receipt pocket. If you choose to request a

receipt, the voice prompt will play the message, “Please take your receipt”.

Note: It is up to the facility management to develop a system to

reimburse the patrons for the short change amount.

7. The Paystation will vend the gate and the customer may exit the facility.

3.4 QR Barcode (with FlexScan Option)

QR codes can be generated by the eParcSuite software using eFlexPrint and

eFlexPass. eFlexPrint is responsible for generating QR validation coupons while

eFlexPass is responsible for generating QR passes that a parker may use to

enter and exit the facility for a number of uses and/or a period of time. This

procedure describes using a QR barcode at the Paystation.

1. When the “A” loop has sensed a vehicle, the Paystation will arm and the transaction

screen will display notifying the patron to insert the entry ticket.

2. If the patron has an eFlexPass:

• Scan the pass using the FlexScan pocket.

If the patron has a barcode validation coupon (eFlexPrint):

[Fig. 3.4A] FlexScan pocket

• Insert the entry ticket and the fee is

generated. Scan the validation coupon

using the FlexScan pocket. The

new fee is

generated from the validation coupon

used. If the QR code can be used more

than once per transaction, scan the QR

code as desired.

Other manuals for Amano OPUS-7000 Series