13
Operation
The handset will automatically time the duration of all external calls. The call
timer will display after the first 10seconds of the call. When the call ends, the
total duration of the call time flashes for 3seconds.
Switch the handset on/off
Press and hold End Call to switch the handset off. Press to turn the handset on.
Calls
Make a call
1. Press Talk.
2. When there is a the dial tone, dial the number.
Preparatory dialling
1. Dial the number first. If a mistake is made, press Phonebook to delete the last digit.
2. Press Talk to dial.
End a call
Press End Call, or place the handset back on the base or charger.
Receive a call
When an external call is received, the phone rings and the icon flashes on the display.
1. Press Talk to answer the call, or if Auto Answer is set to On, simply lift up the handset to answer
the call.
To answer calls by pressing Talk even when the handset is lifted, switch Auto
Answer off, see page 24.
Adjust the earpiece volume
During a call, press Up or Down to increase or decrease the volume.
Mute
The handset can be muted so that a conversation can be held without the caller hearing.
1. During a call, Press Menu. The display shows «MUTE ON» and the caller cannot hear.
2. Press Menu again to resume the call.
Intercom
Make an internal call
If more than one handset is registered to the base, internal calls can be made between two
handsets. Icon flashes and the display shows the handset number you are calling.
1. If only 2handsets are registered to the base, press and hold * and the other handset rings
automatically.
NOTICE
NOTICE
To Next Page
Loading...
Need help?
General