- 17 -
Re-Ping Time：Users can set the power switch to re-detect the connected web
equipment here with preset time period in minutes.
3-2 System Setup
In this section you may learn to set up web/network, email server and message
services.
3-2-1 Network Setup
IP network information data entry:
IP Address：Assign the Network IP address for the power switch.
Subnet Mask：Set up the subnet mask info of this equipment.
Gateway：Set up the gateway port of this equipment.
DNS Server 1：Enter your DNS server1 address if any.
DNS Server 2：Enter your DNS server2 address if any.
Http Port： Assign a HTTP port address here for browsers to be connected to this
equipment via HTTP protocol.
API Port： Provide the Application Program to be connected with the appointed
connect port to this equipment. This product provides API for the user to develop
program connected with this equipment to get the power, electric current,
temperature status and control power (please refer to the explanation 6-3.) You
must setup the network vent connecting the program with this equipment.
To Next Page
Loading...
Need help?
General