- 18 -
3-2-2 Email Server Setup
When there is a triggered warning from the setup of this power switch, this device
will send out an alert message to the preset email accounts.
SMTP Server Address：Enter your SMTP server address here.
SMTP Port：Enter your SMTP port number here. The preset value is 25.
Sender Mail Address：This section displays where the alert email is sent from.
Mail Subject：Enter the topic of the email when the receiver gets the email.
SMTP Auth：If the setup mail server needs to identify the user, please mark this
item and setup the account and password.
SMTP Account：Enter the user id here for SMTP account if needed.
SMTP Password：Enter the password here for SMTP account if needed.
3-2-3
Message Server Setup
When there is a warning, setup the warning message data in the Message Server.
Server Address：Enter the SMS message server’s IP address here so the SMS text
message can be transmitted to the SMS server when the warning event is triggered
by the preset value.
Port：Enter the connection port address for your SMS message server. The preset
To Next Page
Loading...
Need help?
General