Version 1.1 ©Copyright 2014, Ambient LLC. All Rights Reserved. Page 4
1. To insert the batteries,, (1) Twist the KEY lid to unlock, (2) remove the key, and (3) twist the
main body of the sensor by removing the lid, as shown in Figure 2 .
Figure 2
2. The floating thermometer includes dip switches for assigning channel numbers. BEFORE
inserting the batteries, locate the dip switches on the inside cover of the lid of the transmitter.
Figure 3 displays all four switches in the OFF position (factory default setting).
Figure 3
To Next Page
Loading...
Need help?
General
