Version 1.1 ©Copyright 2014, Ambient LLC. All Rights Reserved. Page 5
Channel Number: The F007PF supports up to eight transmitters. To set each channel number (the
default is Channel 1), change Dip Switches 1, 2 and 3, as referenced in Table 1.
Temperature Units of Measure: To change the transmitter display units of measure (°F vs. °C),
change Dip Switch 4, as referenced in Table 1.
Table 1
3. Reference Figure 4. Install 4 x AAA batteries.
Figure 4
(1) Open the battery compartment and (2) insert 4 x AAA batteries into the battery compartment,
observing the correct battery polarity.
To Next Page
Loading...
Need help?
General
