Why does my Ambient Weather WS-16 Thermometer read too high during the day?
To prevent inaccurate high temperature readings during the day with your Ambient Weather Thermometer, ensure the thermo-hygrometer is mounted in a shaded area on a north-facing wall. If this isn't possible, consider using a radiation shield.
Why do indoor and outdoor temperatures not agree on my Ambient Weather WS-16 Thermometer?
If the indoor and outdoor temperatures on your Ambient Weather Thermometer don't match, allow up to one hour for the sensors to stabilize due to signal filtering. The indoor and probe temperature sensors should agree within 4 °F, as the sensor accuracy is ± 2 °F.
How to fix weak display contrast on Ambient Weather Thermometer?
If the display console contrast on your Ambient Weather Thermometer is weak, replace the console batteries with a fresh set.
What to do if the Ambient Weather WS-16 Thermometer wireless remote is not reporting?
If the wireless remote thermo-hygrometer isn't reporting to the console and dashes appear on the display, try these steps: 1. Press and hold the CHANNEL/+ button for 3 seconds to reacquire the signal. The remote search icon should appear, and once the signal is found, the icon will disappear. 2. Ensure the sensor assembly is within the communication range (300’ line of sight, 100’ under most conditions). Adjust the distance if it's too close (less than 5’) or too far. 3. Check that the remote sensor LCD is working and the transmitter light flashes every 60 seconds. 4. Install fresh batteries, using lithium batteries in cold environments. 5. Avoid obstructions like solid metal or earth barriers. 6. Move the display console away from electrical noise sources like computers and TVs. 7....
Instructions for inserting batteries and configuring the remote sensor's dip switches.
Steps to power up and initialize the main display console unit with batteries.
Procedures for adjusting remote and indoor sensor temperature readings for accuracy.
Solutions for when the remote sensor is not reporting or shows dashes.
Addresses problems with high temperature readings or disagreements between sensors.
General| Temperature Measurement Range | -40°F to 140°F (-40°C to 60°C) |
|---|---|
| Temperature Resolution | 0.1°F (0.1°C) |
| Humidity Accuracy | ±5% |
| Update Interval | 60 seconds |
| Power Source (Remote Sensor) | 2 x AA batteries (not included) |
| Display Type | LCD |
| Humidity Measurement Range | 10% to 99% |
| Power Source (Base Station) | AC adapter |
| Weight | 8 ounces |
| Indoor Temperature Range | 32°F to 122°F (0°C to 50°C) |
To Next Page