To Next PageTo Next PageWhy don't the indoor and outdoor temperature readings agree on my Ambient Weather WS-07?
The indoor and outdoor temperature sensors should agree within 2 °F (the sensor accuracy is ± 1 °F). Allow up to one hour for the sensors to stabilize due to signal filtering. If they still disagree after this period, you can use the calibration feature to match the indoor and outdoor temperature to a known source.
How to fix a wireless remote (thermo-hygrometer) that is not reporting to the Ambient Weather WS-07 Thermometer console?
If the sensor communication is lost, dashes (--.-) will be displayed on the screen. To reacquire the signal, press and hold the CHANNEL/+ button for 3 seconds.
How to prevent my Ambient Weather WS-07 Thermometer temperature sensor from reading too high during the day?
To prevent inaccurate high temperature readings, ensure the thermo-hygrometer is mounted in a shaded area on the north-facing wall. If this isn't possible, consider using a radiation shield.
Why don't the indoor and outdoor humidity readings agree on my Ambient Weather WS-07?
The indoor and outdoor humidity sensors should agree within 10 % (the sensor accuracy is ± 5 %). Allow up to one hour for the sensors to stabilize because of signal filtering. If discrepancies persist, use the calibration feature to match the indoor and outdoor humidity to a known source.
What to do if the display console contrast is weak on my Ambient Weather WS-07 Thermometer?
If the display console contrast appears weak, replace the console batteries with a fresh set.
General| Type | Wireless Thermometer |
|---|---|
| Temperature Range (Indoor) | 32°F to 140°F (0°C to 60°C) |
| Temperature Range (Outdoor) | -40°F to 140°F (-40°C to 60°C) |
| Temperature Accuracy | ±2°F (±1°C) |
| Update Rate | 60 seconds |
| Display | LCD |
| Temperature Resolution | 0.1 °F/°C |
| Power (Base Station/Remote Sensor) | 2 x AAA batteries (Remote Sensor) |
| Weight | Base station: 4.8 ounces |
| Humidity Range (Indoor/Outdoor) | 10% to 99% |
Details the steps for setting up the remote thermo-hygrometer sensor.
Instructions for inserting batteries into the remote sensor.
Steps for inserting batteries into the display console.
Completing setup, folding stand, and initial console display.
Steps to verify humidity readings between sensors.
Steps to verify temperature readings between sensors.
How to view and clear minimum and maximum recorded values.
Detailed steps for calibrating the humidity sensor.
Detailed steps for calibrating the temperature sensor.
Troubleshooting steps for when the remote sensor is not communicating.
Addresses issues with the temperature sensor reading too high.
Solutions for when indoor and outdoor readings do not agree.
