To Next Page

To Previous Page

and varies from location to location. The tendency is simply a tool for projecting weather conditions

and is never to be relied upon as an accurate method to predict the weather.

Note: This is a continuation of the previous section. To enter this mode, you must begin at

Section 5.1 and proceed to this section.

Press the

menu key to enter the TENDANCY Set Mode. You can skip over any setting by selecting

the enter key.

Figure 16

1. Change Tendency. Press the up key or down key to alternate the display between SUNNY,

PARTLY CLOUDY and CLOUDY, and RAINY.

2. Pressure Threshold. Press the enter key to change the pressure threshold. The up and down

arrow and pressure tendency will be flashing. Press the up key or down key to adjust the

pressure threshold from 2.0 to 4.0 hPa/hr (the default is 2 hPa/hr).

3. Storm Threshold. Press the enter key to change the storm threshold. The up and down arrow

and pressure tendency will be flashing. Press the up key or down key to adjust the pressure

threshold from 3.0 to 9.0 hPa/hr (the default is 4 hPa/hr).

5.8 Indoor Temperature

Note: This is a continuation of the previous section. To enter this mode, you must begin at

Section 5.1 and proceed to this section.

Press the

menu key to enter the INDOOR TEMPERATURE Set Mode. You can skip over any setting

by selecting the enter key.

Figure 17

Ambient Weather WS-2080 User Manual

Questions and Answers: