www.amcelettronica.com 2
PACK CONTENTS
INSTALLATION
COMPLIANCE
TECHNICAL VOCABULARY
MANUFACTURER
AMC ELETTRONICA
via Pascoli, 359 Loc. Mirovano
22040 Alzate Brianza (CO) Italy
info@amcelettronica.com
www.amcelettronica.com
• The installation must be performed to a professional standard by specialist personnel, respecting the
national plant engineering regulations
• The cables used for wiring, power supply and earthing must have adequate cross sections and be
IEC 60332-1-2 or IEC 60332-2-2 compliant
• The backup battery used must comply with the IEC 60896-21/2 and have a V0 fireproof casing
The installation manual and the programming software can be downloaded
from the website www.amcelettronica.com
X-XV Series / K-KV Series user manual
The cardboard box contains:
• ABS cabinet
• control panel electronic board
• transformer
• earthing cable
• fuse holder
• balancing resistors (8 of 1K and 8 of 2K2)
• screws to assemble the parts and to close the cabinet
• adhesive label with product data
• user manual
AMC Elettronica declares that its alarm control panels comply with the requirements and provisions established
by directive 1999/5/CE and with the standards EN50131-1, EN50131-3, EN50131-6, EN50136-1, EN50136-2
(PSTN line , GSM, GPRS, LAN modules ATS3/SP3).
IMQ certification - Grade 2 - Class 2 security systems.
To ensure compliance with these standards, the control panels must be programmed as indicated in the specific
tables in the technical manual.
Technical terms are sometimes used in this manual:
INPUT / ZONE = alarm device / detector
OUTPUT = device managed by the control panel that does not generate an alarm (e.g. light, irrigation, etc.)
To Next Page
Loading...
Need help?
General