Amcrest IP2M-841 - Page 23

23
4. Tap WiFi Camera.
5. Tap the Add Connected Device button near the
top of the screen, then tap P2P Setup.
Note: Move the
camera or the
phone to ensure
that the entire
QR code is visible
and focused in
the frame. In
case the QR code
cannot be
scanned, please
tap Enter S/N
Manually to
enter in the
camera’s serial
number.
6. Scan the QR code from the sticker on your
camera.
7. Double check to ensure that your S/N (Serial
Number) is entered correctly, then tap Next.