110
Below are a few possible reasons why this may be occurring:
• The power input is not correct voltage.
• The power cable connection is not secured correctly. The firmware was
upgraded incorrectly.
2. Camera often automatically shuts down or stops running.
Below are a few possible reasons why this may be occurring:
• The input voltage is too low or is not stable.
• The insides of the camera have accumulated too much dust.
• The temperature is either too hot or too cold. The hardware is malfunctioning.
3. The system does not detect an SD Card.
Below are a few possible reasons why this may be occurring:
• The SD card is broken.
• The SD card slot is malfunctioning.
• The SD card has not been formatted properly.
4. Real-time video color is distorted.
Below are a few possible reasons why this may be occurring:
• The camera is not compatible with the monitor.
• The camera color or brightness settings are not correctly configured.
5. Local Recordings are not searchable.
Below are a few possible reasons why this may be occurring:
• The SD card is broken.
• The SD card slot is malfunctioning.
• The camera’s firmware is incompatible with the recorded video.
• The recorded files have been overwritten. The recording function has been disabled.
6. Playback video is distorted.
Below are a few possible reasons why this may be occurring:
• The video quality setting is too low.
• The camera software has a read error. Restart the camera to solve this problem.
• The SD card is broken.
• The SD card slot is malfunctioning.
To Next Page
Loading...
