To Next PageTo Next PageWhat to do if there is ecessive oil level in American Eagle Compressor?
If there's an excessive oil level in your American Eagle Compressor, it could be caused by an internal crack inside the oil cooler. Replace the cooler, change the filters, and replace the compressor oil.
Why does my American Eagle SRS-65 Compressor stall?
If your American Eagle Compressor stalls, several factors could be responsible. Start by checking and readjusting the belt, ensuring it is properly tightened. Insufficient hydraulic system pressure or flow can also cause stalling; verify the setting on the supply pressure system relief valve, ensure adequate pressure and flow, and check if other hydraulic systems are activated off the same hydraulic supply. The pressure relief might be set too low, requiring readjustment, or the pressure relief seals could be leaking, necessitating replacement. Additionally, high air pressure relative to the hydraulic system can cause stalling; adjust the pressure switch to reduce air pressure. Leaking solenoid valve cartridge seals on the hydraulic manifold assembly may also be the cause, requiring replac...
Safety decals and their meanings for proper operation and maintenance.
Essential checks and inspections to perform before operating the compressor.
Overview of compressor activation and automatic system function.
Details on how the compressor operates for specific models.
Details on how the compressor operates for specific models.
Important usage warnings and disclaimers for the compressor.
Procedure and intervals for checking the compressor's oil level.
How to drain condensation from the compressor case to prevent damage.
Step-by-step guide for changing the compressor oil, including warnings.
Guidance on selecting the appropriate oil for the compressor.
Specifications and properties required for compressor oil.
Procedure for replacing the oil filter and recommended intervals.
Procedure for replacing the separator cartridge and recommended intervals.
Procedure for cleaning or replacing the air intake filter.
Specifications for belt tensioning for new and used belts.
Procedure for setting the minimum pressure valve if needed.
Maintenance procedure for cleaning the oil coolers.
General guidance for installing compressor, PTO, pump, and related items.
Instructions for wiring the compressor and associated controls.
Information on optional electric speed controls for compressor operation.
Detailed wiring diagram and circuit information for the compressor.
Procedure for installing a temperature gauge probe.
Description of the hydraulic system components and operation.
Description of the air system routing and tank connection.
Instructions for setting the compressor pressure switch.
Diagram of a typical hydraulic circuit for a single stage pump.
Diagram of a typical hydraulic circuit for a tandem (two part) pump.
Diagram of a hydraulic circuit with an auxiliary cooler.
Assembly drawing and parts list for the SRS-65RP model.
Assembly drawing and parts list for the SRS-65P model.
List of replacement parts for hydraulic components and drive systems.
List of replacement parts for electrical and air pressure components.
List of replacement parts for air and oil filters.
List of replacement parts for compressor components.
General| Brand | American Eagle |
|---|---|
| Model | SRS-65 |
| Category | Compressor |
| Language | English |
