AMETEK CTS Automotive Immunity Test Generators
V 1.00 11 / 27
Cables and connectors can be overloaded by high voltages or energies.
Due to internal damage of components fire and/or explosion may occur.
Unintended use of the EUT may cause hazardous situations in the vicinity of the test area.
The user is responsible for the correct EUT protection. The device under test is to be secured in such a way that
no dangerous conditions arise.
Some generators, such as the PFM and PFS 200-series do not generate high voltage on their own.
Nevertheless, a DUT with heavy inductance will self-generate high voltage due to switching processes in all
generators, or when switching them on or off using the 200-series.
CAUTION: Never touch the EUT or anything connected to the EUT during a test!
Never approach an EUT or anything connected to the DUT during a test!
It is absolutely necessary to observe and comply with all safety requirements.
To Next Page
Loading...
Need help?
General
