Ametek 5000 Series User Manual

AMETEK CTS Automotive Immunity Test Generators
V 1.00 25 / 27
5.3. Software Operation
Once the software is installed and connected to the system, configured the remote interface, define and set the
voltage source and the corresponding arb-channel, select a pulse and its parameters and start the test.
1) Select communication interface
2) Define voltage source Database
3) Set voltage source / Arb-channel
4) Select a pulse from the list
5) Set pulse parameter as required
6) Start the test
Access to standard library with license key

Ametek 5000 Series Specifications

General

Brand	Ametek
Model	5000 Series
Category	Inverter
Language	English