AMETEK CTS Automotive Immunity Test Generators
V 1.00 8 / 27
2. Safety functions
The test area must be organized so that only those involved in the test may enter it. In the case that the safety
circuit is used to control the complete area, an additional interlock contact must be used to directly protect the
operator from contact with the DUT.
Neither the DUT nor any cables or accessories must be touched during the test. During work on the DUT, the test
procedure must be stopped and the DUT disconnected from the power mains supply.
Coupling devices have no safety functions built in, because these functions are integrated in the generators.
2.1. Earthing of devices
Earth bolt, when equipped
Generators must be grounded to the reference ground plane. Generally, the generators are equipped with a
metal earth bolt at the rear side of the device.
To Next Page
Loading...
Need help?
General
