123311 01 5
Caution…
About the use:
• Do not use the instrument if the ventilator is out of
order.
About the well, insertion tube and grid plate:
• The well and the insertion tube must be clean before
use.
• The insertion tube must never be forced into the well.
The well could be damaged as a result, and the
insertion tube may get stuck.
• The insertion tube must always be removed from the
calibrator after use.
The humidity in the air may cause verdigris on the
insertion tube inside the instrument. There is a risk that
the insertion tube may be stuck if this is allowed to
happen.
Note…
The product liability only applies if the instrument is
subject to a manufacturing defect. This liability becomes
void if the user fails to follow the instructions set out in this
manual or uses unauthorised spare parts.
To Next Page
Loading...
Need help?
General
