12 123311 01
3.9 MENU
The MENU function (cf. Fig. 6) is used to modify the SETUP
parameters.
)
Hold down
for approx. 2 seconds. The word will
appear on the display.
)
Press
. The first SETUP parameter will be displayed.
)
Press
or to toggle between the SETUP parameters:
: Temperature unit °C or °F.
: The highest permissible temperature for
the calibrator.
: Temperature change per minute used
in connection with SWITCH TEST.
: Extra time which must elapse once the
well is stable before the check mark
symbol is displayed.
: Temperature resolution of 0 or 1
decimal.
)
Press
to select the SETUP parameter you wish to
change. The current value will flash.
)
Press
or to select the required value.
)
Press
to accept your selection or to cancel and
return to the previous value.
)
Once you have changed all SETUP parameters as required,
cancel the function by pressing
twice.
To Next Page
Loading...
Need help?
General
