1.6 Initial Software Startup
Setup automatically sets magnification to be Lab
BOSS
1)
Double
click
the
icon
to
start
the
program.
2)
The program will open up to the last file that
was in use.
If no data files have been created,
the operator can
create a new file.
(See Sec 2.1.1 Create a New File)
Hardness test results will be added to the database of the
current open file.
FOR SMALL-NOSE SCAN HEAD BOSS:
If the unit has a small nose scan head (LAB SMALL), the objective must be changed in the Update Dialog Box from
Lab BOSS to Lab Small. Please refer to section 3.3.1 for details.
To Next Page
Loading...
Need help?
General
