Ametek Sorensen XG 40-21 - Page 320

A-28 M370430-01 Rev F
APPENDIX A SCPI Command Reference
Table A-10 Status Commands (Continued)
Set Operation
Status Positive
Transition
Register
[:]STATus[<channel>]:OPERation :PTRans
ition
Access the Operation
Positive Trans Filter
Register. See Table 5-11 on
page 5-36.
?|<Transition Flags -
(0–65535)>
Yes
Query
Operation
Status
Shutdown
Condition
Register
[:]STATus[<channel>]:OPERation :SHUTdo
wn:CONDition?
See Table 5-13 on page 5-41.
Query the Operation
Shutdown Condition
Register
Yes
Set Operation
Status
Shutdown
Enable
Register
[:]STATus[<channel>]:OPERation :SHUTdo
wn:ENABle
Access the Operation
Shutdown Enable Register.
See Table 5-13 on page 5-41.
?|<Enable Flags
-(0–65535)>
Yes
Query
Operation
Status
Shutdown
Event Register
[:]STATus[<channel>]:OPERation :SHUTdo
wn[:EVENt]?
See Table 5-13 on page 5-41.
Query the Operation
Shutdown Event
Register
Yes
Set Operation
Status
Shutdown
Negative
Transition
Register
[:]STATus[<channel>]:OPERation
:SHUTdown:NTRansition
See Table 5-13 on page 5-41.
?|<Transition Flags -
(0–65535)>
Yes