Ametek Sorensen XG 40-21 - Page 322

A-30 M370430-01 Rev F
APPENDIX A SCPI Command Reference
Table A-10 Status Commands (Continued)
Set Operation
Status
Shutdown
Protection
Positive
Transition
Register
[:]STATus[<channel>]:OPERation
:SHUTdown:PROTection:PTRansition
Access the Operation
Shutdown Protection Positive
Trans Filter Register. See
Table 5-12 on page 5-40.
?|<Transition Flags -
(0–65535)>
Yes
Query
Operation
Status Event
Register
[:]STATus[<channel>]:OPERation
:CSHare[:EVENt]?
Query the Operations Event
Register. See Table 5-11 on
page 5-36.
Yes
Set Operation
Status Enable
Register
[:]STATus[<channel>]:OPERation
:CSHare:ENABle
Access the Operations Enable
Register. See Table 5-11 on
page 5-36.
?|<Transition Flags -
(0–65535)>
Yes
Query
Operation
Status
Condition
Register
[:]STATus[<channel>]:OPERation
:CSHare:CONDition?
Query the Operations
Condition Register. See
Table 5-11 on page 5-36.
Yes
Set Operation
Status Positive
Transition
Register
[:]STATus[<channel>]:OPERation
:CSHare:PTRansition
Access the Operation
Positive Trans Filter
Register. SeeTable 5-11 on
page 5-36.
?|<Transition Flags -
(0–65535)>
Yes
Set Operation
Status
Negative
Transition
Register
[:]STATus[<channel>]:OPERation
:CSHare:NTRansition
Access the Operation
Negative Trans Filter
Register. See Table 5-11 on
page 5-36.
?|<Transition Flags -
(0–65535)>
Yes