Amiga 1000 - Clock Window

AMIGA
1000
ASSEMBLY
LEVEL
REPAIR
1.8
SYSTEM
PCB
TEST
1.8.1 Select
the CLOCK
ICON.
Position the
pointer
on the
clock and
double-click the
left
mouse
button.
The clock
window
will be
displayed.
Check
for CORRECT
TIME
and that the display
is NOT
DISTORTED.
•
If
INCORRECT,
refer
to
1
.9
PCB
CHECK.
1.8.2 Drag the CLOCK
WINDOW
to the lower
right corner
of the
screen.
Position the
pointer on the
DRAG
BAR, depress
the left
mouse
button,
move the
clock
win-
dow and
release the
mouse
button.
Now the
WORKBENCH
ICONS
are
accessible and the
CLOCK
WINDOW
remains
visible.
1.8.3
Select the
DEMOS
DRAWER.
Position
the mouse
on the
DEMOS DRAWER
and
double-click the
left
mouse
button.
The DEMOS
WINDOW will
appear.
1.8.4 Select
DOTS, then
BOXES
and then LINES.
Position
the pointer
on each
ICON and
double-click
the
left mouse
button
to
load
each
DEMO.
The
DEMO
WINDOWS
will
appear
overlapping each other.
Verify
that
each
DEMO is
loaded
and
running.
NOTE:
That as
each
demo is
selected, the
amount of
FREE
MEMORY
is
REDUCED.
•
If ALL
DEMOS
and the CLOCK
are
running
properly, continue
to
1.8.5.
•
If the CLOCK
is
DISTORTED
or the
DEMOS
will NOT
RUN,
refer to 1.9
PCB
CHECK.
1.8.5
CLOSE the
DEMOS
and
the DEMO
WINDOW.
Position the
pointer on the
CLOSE
GADGET H
(in
the
upper left
corner)
of each
open
DEMO and
click the
left mouse
button once.
NOTE:
As
each
window is closed,
additional
FREE
MEMORY
blocks
should
be
added to
the
TITLE
BAR.
Verify that the CLOCK
is
still
running correctly.
•
If NO
PROBLEM is
encountered,
CONTINUE to
1.8.6.
•
If
the CLOCK
is
DISTORTED
or
a
problem is
encountered,
refer
to
1.9
PCB
CHECK.
1-9