VERSION
C-l.l
CUSTOM
DEMO
DISKETTE
OPERATION PROCEDURES
Step
7
Activate
the
Fields
Demo ICON.
The
Fields Demo
displays
3-dimensional
translucent,
randomly
shaped polygons
of different
colors
rotating
on"
the screen.
NOTE:
If the
Demo
displays
correctly,
close
the window by
pulling
down
the screen
until the Fields
Window
is visible,
select
the
Gadget
in
the
upper
left hand corner
then pull
the
Workbench
Screen
back
up to the top of the
display.
NOTE:
If the
Fields
Demo
does not
display
or
displays
incorrectly,
refer
to
Section
2.
Step
8
Activate
the Colorful
Demo ICON.
The
Colorful Demo
displays
256
colors,
changing
red shades
from too
to
bottom and
blue* shades
from
left
to
right.
NOTE:
If
the Demo
displays
correctly,
close
the window
by
selecting
the
Gadget
in the
upper
left hand
corner.
NOTE:
If the
Colorful
Demo
does
not
display
or displays
incorrectly,
refer to
Section
2.
Step
9
Activate
the Amiga
3D Demo
ICON.
The Amiga
3D Demo displays
a
3-
Dimensional
Amiga
Logo
rotating
on
the
screen.
NOTE:
If the Demo
displays
correctly,
close the window by
selecting
the
Gadget
in
the upper
left hand
corner.
**
The Gadget
will
not be
visible
on the
screen
NOTE:
If the Amiga
3D
Demo does
not
display
or displays
incorrectly,
refer
to
Section 2.
.Step
10 'Activate
the
Boing!
Demo
ICON.
The BoingI
Demo displays
a bouncing
ball
with a shadow.
To
view
the Demo,
pull the Workbench
Screen down
approximently
2/3
of
the way
and
wait for
the
ball
to
fully
develop.
Click
the right mouse
button
to
speed
up the Demo and the
left button
to
slow
it
down.
The System-
Audio
is
tested
using this Demo.
NOTE:
If
the
Demo
is displayed
correctly
and both channels are
producing
audio,
close
the window
by
selecting the Gadget
in
the upper left hand
corner
then
pull the Workbench Screen back
up to the
top of
the display.
**
The Gadget will
not
be visible
on the screen.
NOTE:
If. the Boingi
Demo
does not display, displays
incorrectly,
both
channels
are not
producing audio
or audio
is
distorted,
refer
to Section
2.
Step
11 Insert
a Blank or Scratch
Diskette
in the External
Drive. Move the
mouse
to the
Custom Demo
Icon, Press
and hold down the
left button,
Move
the mouse
until
it is
over
the DFl-ICON then release the button.
When
the
Disk Copy
window is displayed,
select the Continue Option.
NOTE:
When
the Disk Copy
is
complete and the Custom Demo
ICON*window
is displayed, the
Custom
IC
Tests are Complete.
***
IF ALL THE
CUSTOM DEMOS OPERATE CORRECTLY
IT MAY BE
NECESSARY
TO
***
***
CHECK
THE SYSTEM
BY DIRECTLY EMULATING
THE
CONDITIONS UNDER WHICH
***
***
THE
CUSTOMER COMPLAINT
SYMPTOMS OCCUR.
***
** *
**»
***
IF THE PC3 FAILURE IS NOT THE RESULT OF ONE
OF THE
SOCKETED CUSTOM
***
***
IC'S PCB
REPLACEMENT/EXCHANGE
IS
RECOMMENDED
AT THIS TIME
***
To Next Page
Loading...