Responding to a Fire
Access Level 1
Indicators Controls
The OVERRIDE key is pressed to override any delays to outputs
Activating the “SILENCE ALARMS. BRIGADE USE ONLY” Key will silence all Alarm Outputs.
Access Level 2
The EVACUATE key is pressed to turn ON all alarm devices.
The SILENCE/RESOUND key is pressed to silence any silence-able outputs that have been
activated.
The ALARMS LED will be illuminated to indicate that the silence-able outputs have been silenced and
resound is available. The operation of the SILENCE key will be logged.
The RESET key is pressed to reset the fire condition. All outputs activated in response to the
fire will deactivate and the panel will revert to the normal condition providing there are no other abnormal
conditions present. – RESET IS LOGGED.
Disabling a Zone
The following example DISABLES a ZONE. Place the Keyswitch in the ENABLED position.
Press
Then to open the “Control” menu. By following
the screen prompts select the type of control, 1 to 4. Once selected simply step through the menu again to
implement.
Press to open the “Zone” menu.
Selecting the Zone Control menu prompts the user to
select the zone number using the generic zone point
selection screen followed by the corresponding zone
control menu. (Sounder access is available at Level 3
only)
To Next Page
Loading...
Need help?
General
