Ampcontrol HPB - Table 2: HPB Error Status Indicator

Ampcontrol Pty Ltd – ABN 28 000 915 542
HPB USER MANUAL
HPBB012 Version 9 – March/2020
Uncontrolled Copy - Refer to Ampcontrol Website for Latest Version
Page 11 of 61
APPROVED FOR EXTERNAL DISTRIBUTION
– PROPERTY OF AMPCONTROL PTY LTD
– NOT TO BE
REPRODUCED IN PART
An error status indicator is also shown on the status page, which is normally zero; exceptions are as
follows:
Table 2: HPB Error Status Indicator
Display Message
Description
Error # 1
Indicates corruption in the Group 1 Settings (HPB Mem Error)
Error # 2
Indicated corruption in the Group 2 Settings (HTU Mem Error)
Error # 3
Is a combination of faults in both groups
For details of Groups see Section 9.1, Parameter Groups.