Ampcontrol HPB - Page 30

Ampcontrol Pty Ltd – ABN 28 000 915 542
HPB USER MANUAL
HPBB012 Version 9 – March/2020
Uncontrolled Copy - Refer to Ampcontrol Website for Latest Version
Page 30 of 61
APPROVED FOR EXTERNAL DISTRIBUTION
– PROPERTY OF AMPCONTROL PTY LTD
– NOT TO BE
REPRODUCED IN PART
“MCI Fail”
Main Contactor Input (MCI) shows the main contactor to be closed when it should be
open
“µ-P reset”
Internal microprocessor reset
“Mem.ERROR”
Records that the relay’s non-volatile parameter memory has been corrupted
“HTU mem.E”
Records that the remote termination unit’s non-volatile memory has been corrupted or
the remote termination unit has gone offline while the outlet is running.