Management: Device Status
The System Status provides you with a snapshot of your Range Extender’s
current connections and settings.
System Information: This section provides you with information on the version
and build time of your firmware. This is used to help our support department
determine what firmware version your device is running.
The Current Date / Time will display the current clock settings of the Range
Extender. If this time is off, go to the System Clock section and configure your
system time.
The Wired Ports Routing shows the active Home Network used for transferring
data to and from the wired ports.
Home Wireless Network Settings: This section displays the current status of the
connection between the High Power Range Extender and your Home Network
(2.4GHz or 5.0GHz). When viewing this section it is important to check that
your Home Network SSID is correct, that the channel number matches your
Home Network's channel number settings.
To Next Page
Loading...
