WI-FI SETTINGS
Home Network Settings
The Home Network Settings page allows you to adjust settings
for your Home Network connection. These settings are for
adjusting the Range Extender after you have already gone
through the Wizard and wish to adjust your current
configurations.
Home Network SSID: Manually enter the Identification name of
the Home Network you wish to connect to.
Channel Number: Enter the channel number of the Home
Network. If the channel number does not match, a connection
will not be established.
Channel Width: Wi-Fi operates in two separate channel widths,
20Hz and 40Hz. 20Hz allows operation on channels 1-11, while
40Hz is 5-11. 40Hz allows for faster speeds. Select the channel width you wish to use for your network. This
setting must match that of your Home Network for a successful connection.
To Next Page
Loading...
