EasyManua.ls Logo

Amped Wireless REC10 - Dual-Band Router & Network Discovery

Amped Wireless REC10
58 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
REC10
USER’S GUIDE
45
45
been reestablished by viewing a website. If you do not have a connection, logon to
http://setup.ampedwireless.com and configure a new Home Network connection.
d. Check to see that your home Wi-Fi router is still on. If it has been turned off please turn it back on. The
Range Extender should automatically reconnect to your Home Network within 10 minutes.
I have a dual-band router and I cannot extend it.
a. Log into the Web Menu for your dual-band Wi-Fi router and adjust the Wi-Fi settings. Change the Wi-
Fi band to 2.4GHz single band mode only. The Range Extender will not be able to extend the 5GHz band.
I cannot find any Wi-Fi networks (Home Networks) to extend.
a. The Range Extender may be out of range. Move the Range Extender closer towards the Wi-Fi router
and try the Setup Wizard again from the Web Menu.
b. The antenna on your Range Extender may be loose. Tighten the antenna connection and try again.
c. The Wi-Fi Home Network may not be a compatible Wi-Fi network (802.11b/g/n).

Other manuals for Amped Wireless REC10

Related product manuals