8.2 Transducer maintenance
Before use check the transducer cables and connectors for signs of wear
and/or damage. If you find any, please replace the item immediately by
contacting Amplivox or your Amplivox distributor, requesting the relevant
part number (see Section 12).
Handle the audiometric headset and other accessories with care. For
parts that are in direct contact with the patient it is recommended that
replacement parts are used or the parts are subjected to a standard
disinfecting procedure between patients.
This includes physically cleaning and use of a recognised disinfectant.
The specific manufacturer's instructions should be followed for use of this
disinfecting agent to provide an appropriate level of cleanliness.
Clean the ear cushions (including those on the Audiocups, if used) with a
recognised disinfectant, e.g. a “Mediswab”.
During the cleaning process do not allow moisture to
enter the earphone.
8.3 Mains adapter maintenance
Before use check the mains AC adapter for signs of wear and/or damage.
If you find any replace the adapter immediately by contacting Amplivox or
your Amplivox distributor. Refer to Section 12 for approved part numbers.
DO NOT USE ANY OTHER TYPE OF MAINS ADAPTER
WITH THIS INSTRUMENT. See Section 2.3.
8.4 Batteries
Batteries (if fitted) should be removed if the instrument is not to be used
over an extended period of time.
To Next Page
Loading...
